RB (Resin-Bonded) Cartridge is produced from cellulose fibers, which have been intrinsically bonded together by a melamine resin to create a solid that is highly durable &has porous structure. By treating the fibers in this fashion we can ensure a stronger cartridge that is less likely to collapse than a wound or pleated cartridge.
Unfiltered fluid passes through depth filter matrix and enables the progressive retention of finer particles, which provides higher efficiency, better dirt retention & long filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.
- Free of surfactants, binders and adhesives.
- Excellent flow with low pressure drop.
- High dirt holding capacity.
- Temperature limit 4.4 Deg C to 93.3 Deg C.
- Longer service life.
|» Standard Sizes||10”, 20”,30”40”|
|» Micron Rating||1, 5, 10, 25|
|» Outside Diameter||64mm|
|» Inner Diameter||28 mm|
|» Food & Beverages||Bottled water, Flavors, Polishing Lines|
|» Pharmaceuticals||Base product clarifications, Membrane prefilter|
|» Fine Chemicals||Solvents, Process Streams, Water Purification|
|» Petrochemicals||Water flood, Completion Fluids, Amines|
|» Cosmetics||Alcohols, Essential oils, Water lines|
|» Water Treatment||Membrane Protection, Resin Trap|
|» Metal Finishing||Plating solution, paints and resins, products Wash|
|» Edible Oil|
|» Mineral Oil|
|» Paints & Inks|
|» Photographic solutions|
|FCI||RBCM||Diameter of cartridge||Micron Rating||Length Of Cartridge|
|Resin Bonded Cellulose Melamine||68 MM||001 Micron||10″ Length|
|005 Micron||20″ Length|
|010 Micron||30″ Length|
|025 Micron||40″ Length|